Description

Performance Hammers Attachments
H140 S
The H140 S hammer is a valuable asset in utility work, quarries and bridge demolition, as well as other large-scale demolition projects.
Impact Energy Class
6000 ft·lbf
Blows per Minute
2176
Minimum Operating Pressure
2176 psi
Specifications
Impact Energy Class
6000 ft·lbf
Blows per Minute
325-540
Minimum Operating Pressure
2176 psi
Maximum Operating Pressure
2321 psi
Minimum Carrier Weight
52900 lb
Maximum Carrier Weight
92600 lb
Minimum Rated Flow
42 gal/min
Tool Shaft Diameter
5.49 in
Maximum Rated Flow
60 gal/min
Minimum Operating Weight
5314 lb
Maximum Operating Weight
5865 lb
Features
Increase Production
<ul><li>Hammer hits with consistent power, delivering constant production.</li><li>Operation cycle is more efficient – less waste in internal heat, more power delivered to the tool.</li><li>Piston and tool are matched in diameter and mass, greatly increasing efficiency in power transmission.</li><li>Blow frequency, hydraulic pressure and impact energy have been tuned to produce the highest possible work rates on Cat machines.</li></ul>
Lower Maintance Costs
<li>No need for constant checking of the gas charge.</li> Design keeps gas pressure steady through the duration of the annual service interval.</li>
<li>All daily checks and routine service can be performed with the hammer attached to the machine.</li><li>Spend more time working and less time on service.</li> Greasing can be performed quickly from one standing-height grease point.</li><li>Service the lower bushing in the field using simple hand tools.</li>
<li>Lower bushing is rotatable – more service life lower parts cost.</li>
<li>Optional on-board autolube provides continual greasing as the hammer runs, protecting your investment.</li><li>Available for extreme environments, the optional wear package protects the hammer housing from damage.</li></ul>
Focus on Your Business, Not Your Hammer
You don’t need to be a hammer expert as our expertise is on call for you. Built-in features like automatic shut-off protect your equipment from poor operation techniques or the occasional mistake. Internal buffering and integral silencing keeps the noise and power on the job, and out of the cab. If you can run an excavator, you can run a Cat hammer like a pro.
Easy to Operate
<li>Auto shut off prevents blank firing, the leading cause of user-induced damage to hammers.</li><li>On a Next Gen Cat Excavator, hammers are protected by Auto-Stop, preventing damage from over-hammering in a single spot.</li><li>This feature helps prevent damage to your machine and premature damage to your hammer, even with inexperienced operators
<li>Performance Hammers lead in both operator comfort and machine protection.</li> The buffering system qualitatively dampens vibration to the machine due to proprietary buffering material.</li> <li>Can be configured for joystick or foot pedal control to suit your operating preference.</li></ul>
Spend Less Time on Maintenance
Daily greasing is a snap, with one basic point at a convenient height. With the addition of a Cat autolube, the hammer is greased while it runs – not just saving you time, but protecting your investment. Rotate or change the bushing in less than an hour. Gas checks are annual, and quickly accomplished without dismounting the hammer. You can do this yourself… or your Cat dealer can provide comprehensive support on your schedule.
Next Level Technology
<ul><li>All models include Product Link technology standard, you can locate the hammer via the Cat App on your phone.</li><li>When paired with a Next Gen Cat excavator, the hammer is automatically recognized and configured
<li>Cat hammer dimensions are included in Cat E-Fence technology – protects the cab, and keeps the hammer in safe areas on the job site.</li><li>Hammer pressure and flow controls can be monitored and configured via the in-cab monitor – manually or automatically.</li></ul>
Upgrade to Meet Your Needs
Add a hammer-mounted autolube system to simplify maintenance and improve reliability on more than just a single machine, making it an ideal choice for large production or demolition companies and rental fleets. You can also add a wear package to armor the hammer against harsh working environments in quarries, mines and demolition sites.
Beyond Your Purchase
Want to learn more about your hammer? Operating and maintenance videos are available online or through your local Cat dealer. Working away from home? Not a problem. Be confident no matter where your job takes you as the global network of Cat dealer is there with not only equipment support and service, but also with the hammer parts and service you may need as well. No other manufacturer can offer you the same.
Why choose RIMCO Barbados

Quality
Exceptional Service
All Emcompassing
Experienced
SUPPORTED EQUIPMENT
326 Medium Excavators
Net Power – ISO 9249
157.8 kW
Operating Weight
25700 kg
Maximum Digging Depth
6820 mm
330 GC – Tier 3 Medium Excavators
Net Power – ISO 9249
157.8 kW
Operating Weight
28900 kg
Maximum Digging Depth
7260 mm
330 Medium Excavators
Net Power – ISO 9249
193.8 kW
Operating Weight
31400 kg
Maximum Digging Depth
7250 mm
333 – Tier 3 Medium Excavators
Net Power – ISO 9249
193.8 kW
Operating Weight
32600 kg
Maximum Digging Depth
7370 mm
336 Large Excavators
Net Power – ISO 9249
311 HP
Operating Weight
79100 lb
Maximum Digging Depth
24.7 ft
345 GC Large Excavators
Net Power – ISO 9249
258 kW
Operating Weight
42200 kg
Maximum Digging Depth
7200 mm
Hydraulic Connecting S Type Coupler HCS70: 580-0407
Machine Class
14-30
Height
20.6 in
Maximum Operating Pressure
5076 psi
Hydraulic Connecting S Type Coupler HCS70: 582-8929
Machine Class
14-30
Maximum Operating Pressure
5076 psi
Weight
648 lb
Hydraulic Connecting S Type Coupler HCS70: 598-7847
Machine Class
14-30
Height
20.7 in
Maximum Operating Pressure
5076 psi
Hydraulic Connecting S Type Coupler HCS70/55: 582-9886
Machine Class
24-30
Height
17.9 in
Maximum Operating Pressure
5076 psi
Hydraulic Connecting S Type Coupler HCS70/55: 582-9976
Machine Class
24-30
Height
20.1 in
Maximum Operating Pressure
5076 psi
Hydraulic Connecting S Type Coupler HCS70/55: 598-7849
Machine Class
24-30
Weight
789 lb
Height
20.2 in
Hydraulic Connecting S Type Coupler HCS80: 583-0203
Machine Class
24-40
Height
20.2 in
Weight
959 lb
Hydraulic Connecting S Type Coupler HCS80: 583-0212
Machine Class
24-40
Weight
1027 lb
Height
21.2 in
S70 S Type Excavator Coupler: 566-2349
Weight
571 lb
Lifting Hook Capacity
8 ton (US)
Width
17.72 in
S70 S Type Excavator Coupler: 566-2351
Weight
628 lb
Lifting Hook Capacity
8 ton (US)
Width
17.72 in
S80 S Type Excavator Coupler: 573-3169
Weight
939 lb
Lifting Hook Capacity
10 ton (US)
Width
23.23 in
S80 S Type Excavator Coupler: 573-3171
Weight
1005 lb
Lifting Hook Capacity
10 ton (US)
Width
23.23 in
LIST OF SUPPORTED EQUIPMENT
Hydraulic Connecting S Type Coupler HCS70: 582-8929
Hydraulic Connecting S Type Coupler HCS70: 580-0407
Hydraulic Connecting S Type Coupler HCS70: 598-7847
Hydraulic Connecting S Type Coupler HCS70/55: 582-9886
Hydraulic Connecting S Type Coupler HCS70/55: 582-9976
Hydraulic Connecting S Type Coupler HCS70/55: 598-7849
Hydraulic Connecting S Type Coupler HCS80: 583-0203
Hydraulic Connecting S Type Coupler HCS80: 583-0212
S70 S Type Excavator Coupler: 566-2351
S80 S Type Excavator Coupler: 573-3171
S70 S Type Excavator Coupler: 566-2349
S80 S Type Excavator Coupler: 573-3169
345 GC Large Excavators
336 Large Excavators
333 – Tier 3 Medium Excavators
330 – Tier 3 Medium Excavators
326 – Tier 3 Medium Excavators
330 GC – Tier 3 Medium Excavators
Cat PL161 Attachment Tracker
Reviews
There are no reviews yet.