MD6310

Up to 39 009 kg (86,000 lb)

229-311 mm (9-12.25 in)

Cat® C32B

Up to 42 149 kg (Up to 92,922 lb)

13.27 m

178-219 mm (7.0-8.625 in)

Bolt-on platform for cold weather generator or fire suppression bottles (option)

Scheduled Oil Sampling (S∙O∙S) ports

Pipe positioner inserts

Electronic compressor control and regulation with purged air lines

Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH

Literature holder

Tram interlock, machine stability limits

Included with either mast

Mast lanyard mounting provisions (option)

75 500/97 500 kg (166,449/214,950 lb)

Rotary head rpm gauge – (digital display in screen)

Hydraulically operated viewing hatch in drill deck with spotlight (option)

Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life

Angle drilling 0-30°; in 5° increments

751 kW

769 kW

750 mm

235 mm

– 114 mm (4.5 in) API reg thread
– 140 mm (5.5 in) API reg thread
– 168 mm (6.625 in) for top sub/shock sub API thread
– 114 mm (4.5 in) for 178 mm (7 in) pipe BECO thread
– 152 mm (6 in) for 194 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO thread

219 mm

Two wire rope pipe catchers, hydraulically actuated pipe positioner, manual bit basket

Breaker panel includes five (5) additional breakers for locally supplied heating elements, if needed

Full arctic lubricant package includes: engine oil, compressor oil and hydraulic oil

203 mm

178 mm

Rated down to –40° C (–40° F) temperatures

178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)

Shore power connection box with switchable 240-600V (50 amp) connection; diesel genset and or plug, sold separately

One wire rope pipe catcher, hydraulically actuated pipe positioner, manual bit basket

Diesel fired heating system that heats and circulates engine coolant through the: engine block, primary water tank, heating elements for battery trays with a provision for fuel tanks

194 mm

Electric heating package with breaker panel to power: 120V heating blanket for compressor receiver tank, compressor control box, heat trace for compressor control lines, heat trace for housing from water tank to water pump and water fast-fill assembly plus tank

13.7 m (44.9 ft) Mast Carousel, dual purpose; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)

• Accepts 194 mm (7.625 in) pipe – contact factory for additional pipe diameters

Dual purpose carousel pipe: 13.7 m (44.9 ft) Mast; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)

• Dual purpose pipe carousel accepts 194 mm (7.625 in) pipe – contact factory for additional pipe diameters

Cab perimeter walkway available with either choice

37.4 m/min

547000 N

In-deck mounted battery box

Filter indicators for hydraulic, compressor and engine

13.27 m

13.79 m

Configuration choices include single pass, multi pass, vertical out to 30 degree angle drilling

Pipe catcher; manual or optional hydraulically actuated

37.4 m/min

6.32 m

21.1 m

Ether starting aid; ether bottle supplied locally

Basic/Manual – Centralized Manual Lube; Gravity Fill for fuel and water

– Water tank capacity 1514 L (400 gal)
– 204 m³/min (7,200 cfm) dry dust collector
– Self-cleaning filters, with auto-eject dust chute

Self-closing, gates secure egress ladder locations

Top Sub, or Shock sub and cross over adapter (option)

C32B @ 1,800 rpm

73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi)

Down to 74.6 m (Down to 244.9 ft)

Level two

25.43 m

Four (4) lift lugs, for use with cables or chains

21.62 m

ECM controlled proportional fan speed control system

Separate engine cooling module

Data logging of machine health with warnings, and fault code records; export capability

24.9 m

Wiring for third party interface

Down to 47.9 m (Down to 157.4 ft)

Feed system accommodates multiple pipe diameters

Bit storage box in-deck with hinged cover (option)

Hydraulic, indexing pipe carousels accept various pipe diameters

Up to 39 009 kg (Up to 86,000 lb)

5.39 m

Tool oiler 113.5 L (30 gal) oil injection system (Rotary drilling only)

203 mm

Coolers with easy cleaning access

Pulldown/hoist system is a single cylinder

17.5 m

Deck wrench, sliding

Walkway around cab to drill deck (option)

Rated down to –18° C (–0.4° F) temperatures

203-311 mm (8-12.25 in)

13 mm

Drill assist (single or multipass auto drill) (options)

Low pressure 8.6 bar (125 psi) for ASME/CR N/AU or CE

– LED interior lights; separate reading light, and backlit joysticks and keypads
– Zone controls for area lights and spot lighting for night drilling
– Flood lights for the drill perimeter
– Spot lights for power group area; drill deck; mast carousel; access ladder and walkways
– Standard lighting is Halogen, 1,300 lumens flood light on perimeter, area spot lights have 1,950 lumens
– Premium lighting is LED, 4,200 lumens flood light on perimeter (option)
– Mast clearance lights, cab mounted strobe, front mounted tram beacon (option)

6.1 m

Air hose retention devices

Vertical to 30° (in 5° increments)

13.7 m (44.9 ft) or 17.5 m (57.4 ft) Mast configurations complete with pipe rack carousel

Drill pipe positioner

1814 kg

2.45 km/h

Operator station design integrates an ergonomic seat, armchair joystick controls with full instrumentation, and two 254 mm (10 in) color, high definition touchscreens and 12 volt power port

Standard – Fast Fill for fuel and water; Automatic Lubrication System

Rated down to –1° C (30° F) temperatures

203-311 mm (8-12.25 in)

Up to 42 149 kg (Up to 92,922 lb)

Seven (7) engine shut down buttons: in cab, at drill deck, on deck at power train, ground accessible by main access point and each side of the drill front and left

Overhead winch with remote; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck (option)

Virtual rotary head travel stops and interlocks

Guards for exhaust pipes and turbo lines

Drill performance touchscreen display

178 mm

Bit sub

Roller deck bushing

Slip resistant surface

Up to 22 113 kg (Up to 48,750 lb)

Optional Command for Drilling enables each operator to manage more than one machine

Fuel tank capacity 1609 L (425 gal)

13.79 m

Pipe wiper seal

Cab perimeter walkway available for both cab sizes

Auto tensioning of pull down and hoist cables

Spacious FOPS cab has 3 m² (32.4 ft²) floor space with an integrated operator station

19.93 m

Replaceable cooler core sections

Fourteen (14)

23.77 m

Stationary rear deck; for vertical and angle drilling

Autonomy ready

56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)

Cabin pressure manometer with indicator (option)

Auto level, auto retract, auto mast

Seat swivels, locks and has two point/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in)

73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi)

56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)

Scheduled oil sampling (S∙O∙SSM) ports

Up to 39 009 kg (Up to 86,000 lb)

5.39 m

42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi)

One (1) auxiliary circuit pump – 110 cc (piston, load sensing)

Two piece bushing

194 mm

Variable speed control

Rotary torque control

Four leveling jacks to provide leveling on a 7° bench (any orientation)

Power convertor 24V to 12V

13.7 m

– Water tank capacity 1514 L (400 gal)

Fixed access ladder to the cab area

Pipe positioner inserts

Approach angle of 14 degrees facilitates loading and unloading on a lowboy

Mast access ladder with mast grating (option)

One hydraulic pipe catcher, plus one wire rope, hydraulically actuated pipe positioner, hydraulic bit basket

Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dust collector)

Three egress points on deck areas in addition to main access

Drill depth indicator and interlocks

Tram alarm is automatic and audible

Pipe wiper seal

178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)

Ground level keyed battery disconnect/starter lockout with remote jump start terminals

Extended cab option 4.2 m² (45.2 ft²); prewired and dedicated space for refrigerator and microwave

Cascading, hydraulic stairs to cab area (option) – includes jack and tram interlock that activates when the stairs are down

219 mm

Rotation torque control

Drill pipe thread greaser with remote fill tank or disposable grease bucket (option)

Cat® 349E EL Excavator type

Shock sub and top sub adapter

Dust suppression control

Static dust curtains, four sides boxed in (standard)

Tram interlock, mast up and locked or down and parked

Bushing Retention Tool 178 to 235 mm (7.00 to 9.25 in) pipe diameter

All electric controls for drilling, tramming, leveling plus auxiliary functions

6.32 m

Prewired for Terrain and autonomous operation

Cross over hammer adapter

Withstands high heat to 52° C (125° F)

Rotation gear box with dual motor arrangement, up to 160 rpm, and 16 000 N∙m (11,800 lbf-ft) of torque

– Floor vents in the foot rest area
– Roof-mounted air conditioner/heating/pressurizing unit
– Filter access from deck, does not require roof access, and has approximately 500 hour service interval
– Defogging HVAC vents on driller window

Delayed engine shut down

C32B @ 1,800 rpm

42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi)

Sliding deck wrench assembly

Cab environment controls (AC, filter, heat, fan speeds)

With the compressors variable volume control, the operator can limit air output resulting in reduced fuel consumption
– Both high and low pressure compressors contain this feature

Drill performance and display system

Two swing-out hinged doors with windows and Cat keyed locks

Trainer’s seat that folds away and has retractable seat belt (optional)

Deck wrench, sliding

75 800/97 000 kg (167,110/213,848 lb)

Spindle with 168 mm (6.625 in) API regular thread and splined collar

235 mm (9.25 in)

Two (2) fan pumps – 1,000 cc (piston, with proportional electronic controls)

Rotation Gear Box with dual motor arrangement, up to 160 rpm, and 16,000 N∙m of torque (11,800 ft-lb)

Automatic variable speed fan control

High pressure 34.4 bar (500 psi) for ASME/CR N/AU or CE

Mast lock indicator

Mast access ladder and grating (option)

Premium – Service center for lubricant drain and fill (compressor oil, hydraulic oil, gearbox oil, engine oil, tool lubrication and grease), Automatic Lubrication System, Fast Fill for fuel and water, blowdown hose

Alloy drill deck covers, with storage provision

– Water tanks total capacity 3785 L (1,000 gal) maximum
– Primary tank above deck – 1514 L (400 gal) capacity (heated for extreme cold weather)
– Secondary tank above deck – 2271 L (600 gal) capacity deck

– Mounted on the front and left sides to provide 360° view from operator’s seat
– Camera on the mast to view pipe carousel/top drive operation

Cab rubber shock-mounts absorb mechanical vibration and restrict exterior noise

Sturdy guardrails, toe guards, self closing gates

Radio-ready for communication and entertainment radio

Two (2) primary pumps – 210 cc (piston, with proportional electronic controls)

– Leather seat with heat and ventilation
– Dual pane window glass
– Front window guard
– Additional in-cab storage box
– Additional windshield wipers on front and rear windows
– Window shades (option)
– Foldaway trainer’s seat (option)
– Removable floor mat

Drill depth meter

Up to 22 113 kg (Up to 48,750 lb)

Heavy duty tow hooks (front end)

Electronic compressor control

Functional in ambient temperature of 52° C (125° F)

Virtual rotary head travel stops and interlocks

Cab roof access ladder (option)

Manual, centralized, lubrication banks for all pivot points on drill, or automated lubrication system (option)

235 mm

DTH hammer storage on drill deck with high pressure configuration (option)

Jack pressure sensors in the display

Pipe positioner engaged/disengaged indicator

Two (2) charge pumps – 43.9 + 56.5 cc (double stack gear, fixed displacement)

Variable grip hydraulic break out wrench (HOBO) for range of pipe diameters

Up to 41 165 kg (Up to 90,753 lb)

One hydraulic pipe catcher, hydraulically actuated pipe positioner, hydraulic bit basket

– Fabric seat
– Single pane window glass
– Windshield wiper for driller window
– Window shades (option)
– Foldaway trainer’s seat (option)
– Removable floor mat

Tram off spray to wet the ground around the cuttings pile (not recommended for cold weather applications)

Three (3)

Tram interlock, jacks retracted

Hinged protective guard for full front drill window

Dual starter motors

Tram interlock, pipe in hole

194 mm (7.625 in), 219 mm (8.625 in)

– Production
– Navigation

Electric horn activated by push button in the cab

Three egress points on deck areas in addition to main access

Fuel capacity expansion for additional +1609 L (425 gal)

Dust curtain lifting system – auto hydraulic raise front and rear (option)

Common air intake filters provide +500 hour service interval in normal operating conditions

Product Link Elite (hardware from factory, subscription package via dealer)

Additional display screen for cc cameras; color, high-definition 254 mm (10 in)