Description

Performance Hammers Attachments
H115 S
Paired with your Cat excavators, the H115 S hammer is the ideal choice for quarries and demolition jobs, or in general construction where a breaker is needed for ground excavation.
Impact Energy Class
3000 ft·lbf
Blows per Minute
2359
Minimum Operating Weight
2359 lb
Specifications
Impact Energy Class
3000 ft·lbf
Blows per Minute
370-800
Minimum Operating Weight
2359 lb
Maximum Operating Weight
3219 lb
Minimum Rated Flow
18 gal/min
Maximum Rated Flow
34 gal/min
Minimum Operating Pressure
2176 psi
Maximum Operating Pressure
2321 psi
Tool Shaft Diameter
4.31 in
Minimum Carrier Weight
26500 lb
Maximum Carrier Weight
44100 lb
Features
Increase Production
<ul><li>Hammer hits with consistent power, delivering constant production.</li><li>Operation cycle is more efficient – less waste in internal heat, more power delivered to the tool.</li><li>Piston and tool are matched in diameter and mass, greatly increasing efficiency in power transmission.</li><li>Blow frequency, hydraulic pressure and impact energy have been tuned to produce the highest possible work rates on Cat machines.</li></ul>
Lower Maintance Costs
<li>No need for constant checking of the gas charge.</li> Design keeps gas pressure steady through the duration of the annual service interval.</li>
<li>All daily checks and routine service can be performed with the hammer attached to the machine.</li><li>Spend more time working and less time on service.</li> Greasing can be performed quickly from one standing-height grease point.</li><li>Service the lower bushing in the field using simple hand tools.</li>
<li>Lower bushing is rotatable – more service life lower parts cost.</li>
<li>Optional on-board autolube provides continual greasing as the hammer runs, protecting your investment.</li><li>Available for extreme environments, the optional wear package protects the hammer housing from damage.</li></ul>
Focus on Your Business, Not Your Hammer
You don’t need to be a hammer expert as our expertise is on call for you. Built-in features like automatic shut-off protect your equipment from poor operation techniques or the occasional mistake. Internal buffering and integral silencing keeps the noise and power on the job, and out of the cab. If you can run an excavator, you can run a Cat hammer like a pro.
Easy to Operate
<li>Auto shut off prevents blank firing, the leading cause of user-induced damage to hammers.</li><li>On a Next Gen Cat Excavator, hammers are protected by Auto-Stop, preventing damage from over-hammering in a single spot.</li><li>This feature helps prevent damage to your machine and premature damage to your hammer, even with inexperienced operators
<li>Performance Hammers lead in both operator comfort and machine protection.</li> The buffering system qualitatively dampens vibration to the machine due to proprietary buffering material.</li> <li>Can be configured for joystick or foot pedal control to suit your operating preference.</li></ul>
Spend Less Time on Maintenance
Daily greasing is a snap, with one basic point at a convenient height. With the addition of a Cat autolube, the hammer is greased while it runs – not just saving you time, but protecting your investment. Rotate or change the bushing in less than an hour. Gas checks are annual, and quickly accomplished without dismounting the hammer. You can do this yourself… or your Cat dealer can provide comprehensive support on your schedule.
Next Level Technology
<ul><li>All models include Product Link technology standard, you can locate the hammer via the Cat App on your phone.</li><li>When paired with a Next Gen Cat excavator, the hammer is automatically recognized and configured
<li>Cat hammer dimensions are included in Cat E-Fence technology – protects the cab, and keeps the hammer in safe areas on the job site.</li><li>Hammer pressure and flow controls can be monitored and configured via the in-cab monitor – manually or automatically.</li></ul>
Upgrade to Meet Your Needs
Add a hammer-mounted autolube system to simplify maintenance and improve reliability on more than just a single machine, making it an ideal choice for large production or demolition companies and rental fleets. You can also add a wear package to armor the hammer against harsh working environments in quarries, mines and demolition sites.
Beyond Your Purchase
Want to learn more about your hammer? Operating and maintenance videos are available online or through your local Cat dealer. Working away from home? Not a problem. Be confident no matter where your job takes you as the global network of Cat dealer is there with not only equipment support and service, but also with the hammer parts and service you may need as well. No other manufacturer can offer you the same.
Why choose RIMCO Barbados

Quality
Exceptional Service
All Emcompassing
Experienced
SUPPORTED EQUIPMENT
313 GC – Tier 3 Small Excavators
Net Power – ISO 9249
70.6 kW
Operating Weight
12400 kg
Maximum Digging Depth
5570 mm
320 – Tier 3 Medium Excavators
Net Power – ISO 9249
117 kW
Operating Weight
21300 kg
Maximum Digging Depth
6720 mm
320 GX – Tier 3 Medium Excavators
Net Power – ISO 9249
103.6 kW
Operating Weight
20500 kg
Maximum Digging Depth
6430 mm
323 – Tier 3 Medium Excavators
Net Power – ISO 9249
117 kW
Operating Weight
22900 kg
Maximum Digging Depth
6730 mm
330 GC – Tier 3 Medium Excavators
Net Power – ISO 9249
157.8 kW
Operating Weight
28900 kg
Maximum Digging Depth
7260 mm
330 Medium Excavators
Net Power – ISO 9249
193.8 kW
Operating Weight
31400 kg
Maximum Digging Depth
7250 mm
336 Large Excavators
Net Power – ISO 9249
311 HP
Operating Weight
79100 lb
Maximum Digging Depth
24.7 ft
Hydraulic Connecting S Type Coupler HCS60: 582-8807
Machine Class
12-19
Weight
386 lb
Height
15.9 in
Hydraulic Connecting S Type Coupler HCS60: 590-2376
Machine Class
12-19
Height
15.4 in
Weight
331 lb
Hydraulic Connecting S Type Coupler HCS60: 590-2377
Machine Class
12-19
Weight
390 lb
Height
16.5 in
Hydraulic Connecting S Type Coupler HCS65: 583-0661
Machine Class
14-20
Height
16.1 in
Maximum Operating Pressure
5076 psi
Hydraulic Connecting S Type Coupler HCS65: 590-2379
Machine Class
14-20
Weight
465 lb
Height
15.4 in
Hydraulic Connecting S Type Coupler HCS65: 590-2380
Machine Class
14-20
Height
15.2 in
Maximum Operating Pressure
5076 psi
Hydraulic Connecting S Type Coupler HCS70: 580-0407
Machine Class
14-30
Height
20.6 in
Maximum Operating Pressure
5076 psi
Hydraulic Connecting S Type Coupler HCS70: 582-8929
Machine Class
14-30
Maximum Operating Pressure
5076 psi
Weight
648 lb
Hydraulic Connecting S Type Coupler HCS70: 598-7847
Machine Class
14-30
Height
20.7 in
Maximum Operating Pressure
5076 psi
Hydraulic Connecting S Type Coupler HCS70/55: 582-9886
Machine Class
24-30
Height
17.9 in
Maximum Operating Pressure
5076 psi
Hydraulic Connecting S Type Coupler HCS70/55: 582-9976
Machine Class
24-30
Height
20.1 in
Maximum Operating Pressure
5076 psi
Hydraulic Connecting S Type Coupler HCS70/55: 598-7849
Machine Class
24-30
Weight
789 lb
Height
20.2 in
M315 GC
Engine Model
Cat® C4.4
Gross Power
148 HP
Powershift Transmission
0.8 gal (US)
M320 Wheel Excavators
Engine Power – ISO 14396:2002
128.8 kW
Operating Weight Maximum
19500 kg
Maximum Travel Speed
37 km/h
M320D2 Wheel Excavators
Engine Model
Cat C7.1
Net Power
124 kW
Maximum Travel Speed
37 km/h
S60 S Type Excavator Coupler: 573-3161
Weight
384 lb
Lifting Hook Capacity
5 ton (US)
Width
13.39 in
S60 S Type Excavator Coupler: 573-3166
Weight
388 lb
Lifting Hook Capacity
5 ton (US)
Width
13.39 in
S60 S Type Excavator Coupler: 573-3168
Weight
324 lb
Lifting Hook Capacity
5 ton (US)
Width
13.39 in
S70 S Type Excavator Coupler: 566-2349
Weight
571 lb
Lifting Hook Capacity
8 ton (US)
Width
17.72 in
S70 S Type Excavator Coupler: 566-2351
Weight
628 lb
Lifting Hook Capacity
8 ton (US)
Width
17.72 in
S80 S Type Excavator Coupler: 573-3169
Weight
939 lb
Lifting Hook Capacity
10 ton (US)
Width
23.23 in
S80 S Type Excavator Coupler: 573-3171
Weight
1005 lb
Lifting Hook Capacity
10 ton (US)
Width
23.23 in
LIST OF SUPPORTED EQUIPMENT
Hydraulic Connecting S Type Coupler HCS60: 590-2376
Hydraulic Connecting S Type Coupler HCS60: 582-8807
Hydraulic Connecting S Type Coupler HCS60: 590-2377
Hydraulic Connecting S Type Coupler HCS65: 590-2380
Hydraulic Connecting S Type Coupler HCS65: 590-2379
Hydraulic Connecting S Type Coupler HCS65: 583-0661
Hydraulic Connecting S Type Coupler HCS70: 582-8929
Hydraulic Connecting S Type Coupler HCS70: 580-0407
Hydraulic Connecting S Type Coupler HCS70: 598-7847
Hydraulic Connecting S Type Coupler HCS70/55: 582-9886
Hydraulic Connecting S Type Coupler HCS70/55: 582-9976
Hydraulic Connecting S Type Coupler HCS70/55: 598-7849
S60 S Type Excavator Coupler: 573-3168
S60 S Type Excavator Coupler: 573-3166
S70 S Type Excavator Coupler: 566-2351
S80 S Type Excavator Coupler: 573-3171
S60 S Type Excavator Coupler: 573-3161
S70 S Type Excavator Coupler: 566-2349
S80 S Type Excavator Coupler: 573-3169
M320D2 Wheel Excavators
M315 GC
M320 Wheel Excavators
313D2 GC (2017) Small Excavators
313D2 L (2017) Small Excavators
313 GC Small Excavators
336 Large Excavators
323 – Tier 3 Medium Excavators
320 – Tier 3 Medium Excavators
320 GX – Tier 3 Medium Excavators
330 – Tier 3 Medium Excavators
330 GC – Tier 3 Medium Excavators
Cat PL161 Attachment Tracker
Reviews
There are no reviews yet.